[ipodlover77]

Just wondering if any of you guys have a loose lock switch. I know im being a bit **bleep** but i was wondering how you guys dealt with it. Did you just accept it or just try to get a replacement? its loose enough to move upwards about 2mm (little i know, but noticable) 

[radical24]

yes have the same issue it is a bit lose, but this is my second one and its behaving the same as the first so i take it as it is a part of the normal behavior. 

[ipodlover77]

thanks for the quick reply! is yours to the point where it actually moves up a little bit??

[radical24]

yes it is, you can feel it. again for now it is not worrying me as it is the second n97 and both had this happen so i assing it to design. if it continues to the point when it stops working as a lock key then i will be rather annoyed with this 

[mehrdadnick]

I also have the same issue and it has happend on the first one and the replacement which now has the latest firmware. As far as I can see is nothing to do with the key being loose. When operating normally slight vibration gives the imptression of stiffness. I belive there are major problems here and I am getting rather anoid by all these niggeling problems.

[gazpeiti]

Hey I am having the same problem,   this is my second N97 and I returned the first one because I was able to hear the vibration every time I was touching the screen. really anoying.

On the second one, the vibration was gone,(just normal) barely noticeable. but now, almost a month ago, I am starting to have the same issue.

do you guys have the same problem? Note that I have the vibration mode at the lowest level.

I am thinking of return it and go for a pre or maybe , I do not want to say it but iphone might be an option ( going to the dark side)

[eljake]

I also have huge problems with the lock switch. Sometimes its not responsive and sometimes it take awfull long time to unlock. I have found it very buggy when recieving a incomming call. its not my phone only a co-worker has the same issues. I think its a software problem, because of the delay of the locking and unlocking function is random. I have the v. 11 firmware.