[aton6116]

Hi, I have a e90 and I was changing the housing on it. I got it all together but now something weird is happening. The Internal LCD screen is always on, even when the phone is closed its still on and the external screen will not activate. I know the screen works because when it powers up the outside lcd turns on and says nokia but then immediately the inside one is activated. Any help? Thanks in advance.

[gemini632003]

Hi, this is the first time I've heard anyone actually change the housing of their E90 themselves.
I'm curious to where this (housing) is available from & what was the colour? have you opened the housing again to check if you have accidentally disconnected something? If such malfunction continues you must take it to a repair service shop or direct to Nokia care, good luck !

[peterf]

Not the first time I have read of this problem.
The last time the cause was that the person who had attempted to change the case had not correctly reinstalled the small magnetic case switch that activates/de-activates the internal screen.
This magnet/switch is quite small and easily lost when the case is removed. Nokia Service point will no doubt be able to repair this but not free of charge.

[rich]

... and the reason they are likely to charge is because if it's proved you did this yourself you will have invalidated your warranty.

[mjapmarce]

did you forgot to put back the neodymium magnet at it's place?

if you don't know where, it's just by the end call key left side, when you open the internal display.

I haven't completely opened my own but I did opened the external only and change the faceplate and keypad. I have two e90 any way . the other one is for experiment.

[stormes]

Dear sir,

i am facing the same problem right now, i couldnt find any magnet you guys had been talking about. anyone can solev my issue