13-Feb-2011 12:56 PM
when i record any moving object like bike.car etc the object dont recorded in a homogenous fashion actually the moving objet pauses for 1 second & than jump to real time again & again.
i have the updated firmware v052.003.
Solved! Go to Solution.
14-Feb-2011 07:55 AM
this true espesially for fastmoving objects or if the phone itself is being sortof waved when recording.
nokiacare told me that this is because ths phone records at 15fps or something to the same meaning.. i'm not sure but i remember the 15fps part
14-Feb-2011 09:12 PM
If the 15 fps (frame per second) is drawback for an interrupted video recording than why the N73 do the same job flawless perfectly with same 15fps configuration though its E52 is much advanced in everything as compare to N73
15-Feb-2011 03:56 AM
So its something else then ![]()
15-Feb-2011 05:58 AM
do you mean while playing the captured video you face such issue?
if so could you please check whether the video is being stored in memory card?
change the location of the video file to phone memory and then check ![]()
16-Feb-2011 07:58 PM
ya it stored on memory card but when I changed location to phone memory & recorded new video it recorded in streamline fashion without any pause for moving object but their is too short time for video.
So is it the problem of memory card?
17-Feb-2011 04:14 AM
yes it seems so, what 'class' of mmc are u using?
use class 4 and above for good results ![]()
17-Feb-2011 07:20 AM
Thanks vijayt! Never knew there were speed ratings for MCs ![]()
I checked and my mc is class 4.. i get lag in videos only once in a while.. very rare..I think class6 should be perfect for my phone.
17-Feb-2011 08:52 PM - last edited on 17-Feb-2011 08:54 PM
How to know the class of Mmc ?
I have the Taiwan made mmc which came along the mobile.
18-Feb-2011 06:31 AM
My mc has a C with a 4 inside it.. C4
the 4 has to be inside the C.. ![]()
that shows that its class 4
18-Feb-2011 07:31 AM
on my MMC these information are printed -
2 gb micro sd
1040GB1664F
SD-C02G TAIWAN
14-Jun-2011 05:29 PM
i think this is due to the lack of memory.close all application using a taskmanager.then camera will work fine.